Product Overview
New Portable EV Charger with 2.4 Inch Screen featuring APP Bluetooth, WIFI, and RFID Card Intelligent Car Charger functionality. This Type 2 charger with Schuko plug offers a portable and simple charging solution for travel or when away from traditional charging stations.
- Max 16A output with 18-foot cable and ControlBox
- Compatible with electric/hybrid vehicle Type 2 ports
- Comprehensive protection: overvoltage, overheat, and overcurrent
- Clear charging status indicators and error display
Device Settings & Configuration
Date & Time Setup
If the device is used for the first time or has not been used for more than 20 days, please set the date and time after turning it on. Incorrect time will affect the scheduled charging function.
Display Settings
The LCD brightness can be adjusted from 10% to 100%. Turn off the screen after the set delay time without touching the button. If Off-LED is enabled, the LED will turn off simultaneously with the LCD.
PIN Security
When PIN is enabled, PIN code needs to be entered to access the Menu, and the icon on the status display page will light up.
Reservation Settings
Three reservations can be set, with charging scheduled between start and end times. If stop charging is enabled, charging will pause upon the stop time; otherwise, it will continue until the battery is fully charged, following the week setting. After reservation is enabled, the icon on the status display page will light up.
Charge Mode Options
Once Plug & Charge is enabled, you can start charging when the vehicle plug is connected, with no other authorization required.
Charging History
The device can store up to 30 records, which can be viewed through the left and right buttons (turn orange and touch the button).
RFID Management
RFID can be added or disabled, with maximum of six cards added and saved.
Wi-Fi Connectivity
The device needs to be set with wireless name and password through the APP, and you can also set static IP address. The ChargeID and URL for OCPP need to be set via the APP.
OCPP Setup Procedure
- Successfully bind the charger with APP via Bluetooth
- Set up WiFi to successfully connect to the network
- Configure OCPP parameters on the settings page using the APP
- Enable OCPP on the charger's LCD
Load Balancing
The device can communicate through ModBus TCP in WiFi mode. After enabling load balancing, control the current during the charging process through the enabled communication mode.
